HOME | WHAT IS BESPOKE? | COMPANY PROFILE | ONLINE SUIT DESIGN | MAIL ORDER SHOP | MEASUREMENT GUIDE | FABRICS | CONTACT | LINKS
Outlook Bespoke Tailors

MEASUREMENT GUIDE

JACKET HALF WAIST MEASUREMENT
To calculate the circumference measurement the tape must be placed at the point of greatest suppression ? front edge to centre back seam.

CHEST
Remove the customer's jacket. Standing behind the customer, place the tape over the fullest part of his chest, under the armhole, and around to the back covering his blades. The tape should be snug not tight (one finger under the tape). Half this value is to be indicated for ?Half Chest?.

STOMACH
Take this measurment on the shirt on the fullest part of the stomach. Take it snug but not tight (one figure under tape). Indicate half this value in the space for half stomach. You can also indicate the jacket-half waist.

WAIST
This refers to trousers waist. Ask the customer to open the top of his trousers and to hold up his trousers. Place the tape around the smallest part of his waist and indicate half this value in the ''waist'' boxes provided underjacket and trousers measurements.
Even if only ordering a jacket, trousers half waist must be indicated.

SEAT
The trousers pockets must be empty with the customer's feet together, measure fullest part of the seat, also with one fingers under the tape. We will give the Customer the extra room he needs to be comfortable. The half of this measure must be indicated in the appropriate box under both jacket and trousers measurements

JACKET TOTAL LENGTH
From collar over the middle back seam to the length position that the customer requires.

HALF BACK
Measurement across the back from hindarm seam on the sleeve to the back middle seam.

SLEEVE LENGTH
From the sleeve head on the shoulders to the length that the customer requires.

INSEAM
Along the in seam measured from seat seam to the length required.

OUTSEAM
From the bottom of the waistband, along outseam to the length position.

LENGTH TO OPENING
Measure from the nape of the neck to the opening position as required.

FULL LENGTH
Start from the nape of the neck to the full length as required.

BACK LENGTH
From the center back neck to 2cms below the trouser waist.

Home | What is Bespoke? | Company Profile | Online Suit Design | Mail Order Shop | Measurement Guide | Fabrics | Contact | Links Powered by NetMail